Welcome, Guest. Please login or register.
October 18, 2019, 02:01:20 PM


Author Topic: SD Card and ML issue !?!  (Read 3755 times)

Offline Davem

  • Sr. Member
  • *
  • Posts: 336
SD Card and ML issue !?!
« on: April 22, 2013, 07:07:06 PM »
I know there are of threads posted on ML. I have read thru the wiki,the FAQS, and the trouble shooting.I have the right firmware, 1.0.9. I have a  16G card. i have unzipped the ML 2.3 file onto the MISC part of my card. i have put a full battery in my cam. i have pressed the trash bin button on my cam to activate...i cant bring ML onto my LCD...

any advice/ ideas would be appreciated

Dave
« Last Edit: April 22, 2013, 07:26:31 PM by dmoug »
Canon T2i x2, 55-"nifty" 250mm lens, 18-55mm kit lens, Battery grip.

Offline Davem

  • Sr. Member
  • *
  • Posts: 336
Re: SD Card and ML issue !?!
« Reply #1 on: April 22, 2013, 09:23:24 PM »
Is ok ...i got it.... went back and  RMOTFM   ;D


Dave
Canon T2i x2, 55-"nifty" 250mm lens, 18-55mm kit lens, Battery grip.

Offline AndyCivil

  • Moderator
  • *
  • Posts: 2412
Re: SD Card and ML issue !?!
« Reply #2 on: April 22, 2013, 10:47:36 PM »
Glad you fixed it - there are a few steps, some of them are not obvious, and I'm expecting that you omitted a critical one. You wouldn't be the first ;-)

Offline Dazzlin Dave

  • Sr. Contributor
  • *
  • Posts: 1207
  • Raw...the only way to run.....
Re: SD Card and ML issue !?!
« Reply #3 on: April 23, 2013, 11:12:59 AM »
Has to be installed in the root of the card,not MISC folder,right?
Canon T3i
18-55 kit lens, 50mm f1.8, ef 35-70, ef 35-80 w/macro mod, Tamron  SP 70-300mm Di VC USD

Offline Davem

  • Sr. Member
  • *
  • Posts: 336
Re: SD Card and ML issue !?!
« Reply #4 on: April 23, 2013, 06:34:41 PM »
Actually i did copy to  the misc part of the card....i'm pretty sure i did. There was wiki advice to low-level format the card and another guy said DONT reformat the card to low level. Eventually i low leveled it.  Really important; use a real Canon battery. Also thr fir file has to be copied to the ML file even if you have the correct firmware factory install. That has something to do with bootflag i think....autoexec.bin is critical too. I am thinking you guys know all this already.

Now i am curious about the root part of the card?   I thought misc was the root...oh well it worked anyhow.

Dave
« Last Edit: April 23, 2013, 06:51:47 PM by dmoug »
Canon T2i x2, 55-"nifty" 250mm lens, 18-55mm kit lens, Battery grip.